0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Automatic sliding doors
  4. Ferndown

Automatic sliding doors in Ferndown

Survey, drawings and a written price for automatic sliding doors in Ferndown.

A slim framed slider can sit inside an existing Ferndown frontage with little change to the outside. The drive hides behind the fascia, and the leaves line up with the screens either side.

Measuring the opening is the easy part of a survey in Ferndown. We also look at the beam above, the pavement fall and any meters or drains nearby.

Bi-parting automatic sliding glass doors in a slim aluminium frame at a shop entrance

How do you design around the building when planning automatic sliding doors in Ferndown?

A deep recess is a gift for an automatic door. At Ferndown premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.

A corner unit in Ferndown can often move its entrance to the angle, where two directions of footfall meet. We'd look at a curved or canted door set, and check the wind on both streets before fixing the position.

Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Ferndown premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.

What permissions should you check for automatic sliding doors in Ferndown?

England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for automatic sliding doors at premises in the Ferndown area: a planning application, or work that doesn't materially affect the external appearance.

We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Ferndown premises normally go to Dorset Council.

What might automatic sliding doors cost in Ferndown?

Our guide band is £3,895 to £11,995 plus VAT per entrance. Scope is the biggest lever, so a tighter brief for automatic sliding doors brings the figure down faster than any change of detail.

Ferndown at a glance
TownFerndown
AreaDorset
Postcode districtsBH22
Planning authorityDorset Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 120 miles
SurveyFree for new work

Questions about automatic sliding doors in Ferndown

How noisy would an automatic door be at my Ferndown shop?

A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.

Will the door keep opening for passers-by in Ferndown?

Not if it is set up properly. We narrow the sensor field on site and test it against real footfall, so only people heading for the door trigger it.

What will people on the street see at my Ferndown entrance?

Ideally, very little. The drive sits behind the fascia, the leaves line up with the screens beside them, and the frame colour matches the rest of your front.

Does the Equality Act apply to a shop entrance in the Ferndown area?

Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.

Do roller shutters need planning permission in the Ferndown area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning automatic sliding doors in Ferndown?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price