Timber gives a shopfront in Ferndown something metal can't: real depth, cast shadows and mouldings you can run your hand along. We draw each front to the measured opening and make it to those signed-off dimensions.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Ferndown, because what sits behind them can change the drawing.

What should you think about before commissioning timber shopfronts in Ferndown?
A south or west-facing Ferndown frontage is hard on paint. We'd steer you toward a lighter colour or a more stable timber, and if the brand needs a dark finish, we'd plan a shorter repaint interval from the outset.
A corner plot gives a timber front two faces and one chance to get the turn right. For Ferndown premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Ferndown premises.
What is a realistic budget for timber shopfronts in Ferndown?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
Who approves timber shopfronts in Ferndown?
For timber shopfronts at premises in the Ferndown area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Expect planning and advert applications here to go to Dorset Council in the normal way. We check what that means for your building when we survey it in Ferndown.
| Town | Ferndown |
|---|---|
| Area | Dorset |
| Postcode districts | BH22 |
| Planning authority | Dorset Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 120 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Ferndown
Can you fit a timber front around existing tiles in Ferndown?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Will timber suffer on my Ferndown frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
What should I budget for looking after a timber front in Ferndown?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Do roller shutters need planning permission in the Ferndown area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
What rules apply to a fire exit door through a shopfront in the Ferndown area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.