Across Hampshire, timber is the material we suggest when a building has proportions worth respecting. For Ringwood premises, we set the stallriser, pilasters and fascia from the elevation above, then detail the joinery to match.
Surveys for Ringwood are booked with you directly. Tell us your quieter days and we'll work around them.

What makes timber shopfronts work well on Ringwood premises?
Timber fits a night programme better than you'd think, since most of the joinery is made elsewhere. For a unit in Ringwood that can't close by day, we'd fit the frame in stages at night and leave painting until the end, once the dust has gone.
A south or west-facing Ringwood frontage is hard on paint. We'd steer you toward a lighter colour or a more stable timber, and if the brand needs a dark finish, we'd plan a shorter repaint interval from the outset.
A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Ringwood, carry the fascia and glass line round the corner and treat both faces as one composition.
How much should you set aside for timber shopfronts in Ringwood?
Our guide band is £3,995 to £13,995 plus VAT for a typical frontage. Scope is the biggest lever, so a tighter brief for timber shopfronts brings the figure down faster than any change of detail.
Could timber shopfronts in Ringwood need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for timber shopfronts at premises in the Ringwood area: a planning application, or work that doesn't materially affect the external appearance.
Ringwood applications for planning permission or advertisement consent are normally handled by New Forest District Council. Our survey includes a check of the position for your address.
| Town | Ringwood |
|---|---|
| Area | Hampshire |
| Postcode districts | BH24 |
| Planning authority | New Forest District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 118 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Ringwood
Will timber suffer on my Ringwood frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Can you copy a timber shopfront I've seen in Hampshire?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Ringwood opening.
What should I budget for looking after a timber front in Ringwood?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Do I need listed building consent for a shopfront in the Ringwood area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
What rules apply to a fire exit door through a shopfront in the Ringwood area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.