A well-made timber front should still look good in New Milton long after the first coat of paint has gone. That comes from choosing a durable timber, sealing the end grain and keeping water away from the bottom of every member.
It helps if you can be there when we visit New Milton, since five minutes walking the frontage together answers more than a long email.

What should you think about before commissioning timber shopfronts in New Milton?
If your New Milton premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
A corner plot gives a timber front two faces and one chance to get the turn right. For New Milton premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so New Milton premises on a slope look settled once that line is true.
Who approves timber shopfronts in New Milton?
For timber shopfronts at premises in the New Milton area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Planning and advert applications for New Milton premises normally go to New Forest District Council. We check the position for your address at survey.
What is a realistic budget for timber shopfronts in New Milton?
As a working budget, use £3,995 to £13,995 plus VAT for a typical frontage. Your place inside that range for timber shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | New Milton |
|---|---|
| Area | Hampshire |
| Postcode districts | BH25 |
| Planning authority | New Forest District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 124 miles |
| Survey | Free for new work |
Questions about timber shopfronts in New Milton
How much disruption will a timber front cause in my New Milton shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Can a timber front take a modern sign in New Milton?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Is timber a sensible choice for my New Milton frontage?
Usually, if you're happy with a repaint every 5 to 7 years. A survey shows how exposed the front is and whether the structure behind it is sound, and we'll tell you if aluminium would serve you better.
What rules apply to a fire exit door through a shopfront in the New Milton area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the New Milton area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.