We make timber shopfronts for Parkstone premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
Surveys for Parkstone are booked with you directly. Tell us your quieter days and we'll work around them.

What goes into getting timber shopfronts right in Parkstone?
A brand rollout can include timber, as long as the details repeat. For a branch in Parkstone we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
If your Parkstone premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Parkstone unit of that kind.
How much could timber shopfronts in Parkstone cost you?
The guide for timber shopfronts is £3,995 to £13,995 plus VAT for a typical frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
Which applications might timber shopfronts in Parkstone involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Parkstone area, an application is then likely. The council confirms which side of that line a job falls on.
Parkstone applications for planning permission or advertisement consent are normally handled by Bournemouth, Christchurch and Poole Council. Our survey includes a check of the position for your address.
| Town | Parkstone |
|---|---|
| Area | Dorset |
| Postcode districts | BH12, BH14, BH15, BH17 |
| Planning authority | Bournemouth, Christchurch and Poole Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 126 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Parkstone
Can you copy a timber shopfront I've seen in Dorset?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Parkstone opening.
Is timber a sensible choice for my Parkstone frontage?
Usually, if you're happy with a repaint every 5 to 7 years. A survey shows how exposed the front is and whether the structure behind it is sound, and we'll tell you if aluminium would serve you better.
What should I budget for looking after a timber front in Parkstone?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Do roller shutters need planning permission in the Parkstone area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
What rules apply to a fire exit door through a shopfront in the Parkstone area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.