Replacing tired glazing on Parkstone premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.
Measuring the opening is the easy part of a survey in Parkstone. We also look at the beam above, the pavement fall and any meters or drains nearby.

How would we approach curtain walling for your Parkstone premises?
If the frontage joins a neighbouring building in Parkstone, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
Where your frontage in Parkstone faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Parkstone, carry the fascia and glass line round the corner and treat both faces as one composition.
What should you budget for curtain walling in Parkstone?
The guide for curtain walling is £550 to £1,250 plus VAT per m². Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
What consents could affect curtain walling in Parkstone?
For curtain walling at premises in the Parkstone area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Bournemouth, Christchurch and Poole Council.
| Town | Parkstone |
|---|---|
| Area | Dorset |
| Postcode districts | BH12, BH14, BH15, BH17 |
| Planning authority | Bournemouth, Christchurch and Poole Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 126 miles |
| Survey | Free for new work |
Questions about curtain walling in Parkstone
Can you match the frames already on my Parkstone building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Can you replace failing curtain walling on premises in Parkstone?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Is curtain walling right for a single-storey unit in Parkstone?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
What rules apply to a fire exit door through a shopfront in the Parkstone area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Parkstone area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.