Automatic sliding doors for Gelligaer premises start with how people reach your entrance. We look at the pavement, the footfall and the space either side of the opening before recommending a door.
Surveys for Gelligaer are booked with you directly. Tell us your quieter days and we'll work around them.

What goes into getting automatic sliding doors right in Gelligaer?
For a pharmacy or retail chain with a branch in Gelligaer, we'd keep the door type, finish and settings the same as the estate standard. Opening width and head detail then adapt to this particular front.
A deep recess is a gift for an automatic door. At Gelligaer premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Gelligaer premises, since a shutter box or old beam may set the limit.
How much could automatic sliding doors in Gelligaer cost you?
The guide for automatic sliding doors is £3,895 to £11,995 plus VAT per entrance. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
Which applications might automatic sliding doors in Gelligaer involve?
The existing rules still apply in Wales, because most of the Planning (Wales) Act 2026 is waiting for a commencement order. For automatic sliding doors at premises in the Gelligaer area, building work that materially affects the external appearance needs planning permission, while a true like-for-like replacement usually doesn't. The council confirms the current position.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Gelligaer premises normally go to Caerphilly County Borough Council.
| Town | Gelligaer |
|---|---|
| Area | Gwent |
| Postcode districts | CF82 |
| Planning authority | Caerphilly County Borough Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 84 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Gelligaer
How noisy would an automatic door be at my Gelligaer shop?
A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.
What do I need to arrange for a door in Gelligaer?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
Will the door keep opening for passers-by in Gelligaer?
Not if it is set up properly. We narrow the sensor field on site and test it against real footfall, so only people heading for the door trigger it.
Can a shop fire exit in the Gelligaer area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.
When does a shop sign in the Gelligaer area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.