Survey, supply and set-up of automatic sliding doors for Hythe premises all run under one contract, arranged from Great Barr. The usual pattern is 3 to 6 weeks to order after sign-off, then typically 1 to 3 days on site.
It helps if you can be there when we visit Hythe, since five minutes walking the frontage together answers more than a long email.

Where should you begin with automatic sliding doors in Hythe?
Where a landlord in Hythe wants the frontage kept looking the same, a slim slider can sit behind the existing line. We'd draw the operator inside the fascia and give the landlord a clear elevation to approve.
A deep recess is a gift for an automatic door. At Hythe premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.
Where the footway outside your Hythe premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
What sign-off might you need for automatic sliding doors in Hythe?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for automatic sliding doors at premises in the Hythe area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Planning and advert applications for Hythe premises normally go to New Forest District Council. We check the position for your address at survey.
What price should you expect for automatic sliding doors in Hythe?
Allow £3,895 to £11,995 plus VAT per entrance. Size and specification set most of that figure for automatic sliding doors, and the rest depends on what the survey finds on site.
| Town | Hythe |
|---|---|
| Area | Hampshire |
| Postcode districts | SO45 |
| Planning authority | New Forest District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 119 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Hythe
What do I need to arrange for a door in Hythe?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
What will people on the street see at my Hythe entrance?
Ideally, very little. The drive sits behind the fascia, the leaves line up with the screens beside them, and the frame colour matches the rest of your front.
How noisy would an automatic door be at my Hythe shop?
A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.
Do I need planning permission to change a shopfront in the Hythe area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
What rules apply to a fire exit door through a shopfront in the Hythe area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.