Good automatic entrances look calm and quiet, with very little on show. For Hedge End premises, that means hiding the operator, aligning the leaves and setting the door to your hours.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Hedge End, because what sits behind them can change the drawing.

What makes automatic sliding doors work well on Hedge End premises?
In a parade in Hedge End with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
On a narrow Hedge End frontage, parked leaves can leave too little opening. We'd look at a telescopic or single-slide set, and consider moving the door to one side to free up the display.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Hedge End premises on a slope look settled once that line is true.
Could automatic sliding doors in Hedge End need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for automatic sliding doors at premises in the Hedge End area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
For Hedge End, the usual route for planning and advert applications is through Eastleigh Borough Council, and we confirm that when we visit.
How much should you set aside for automatic sliding doors in Hedge End?
As a working budget, use £3,895 to £11,995 plus VAT per entrance. Your place inside that range for automatic sliding doors depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | Hedge End |
|---|---|
| Area | Hampshire |
| Postcode districts | SO30 |
| Planning authority | Eastleigh Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 116 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Hedge End
Will an automatic door fit my Hedge End shop?
It depends on the width of the front and the depth at the head. A survey shows whether the parked leaves fit and where the operator can hide, and if a slider won't work we'd look at a powered swing door.
Will the door keep opening for passers-by in Hedge End?
Not if it is set up properly. We narrow the sensor field on site and test it against real footfall, so only people heading for the door trigger it.
Who installs automatic doors in Hedge End?
Vetted door teams working under S&K Glazing handle the fit and set-up, travelling from Great Barr. Your agreement is with S&K Glazing Limited, and one person stays your point of call.
What rules apply to a fire exit door through a shopfront in the Hedge End area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Hedge End area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.