We make timber shopfronts for Hedge End premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
It helps if you can be there when we visit Hedge End, since five minutes walking the frontage together answers more than a long email.

What goes into getting timber shopfronts right in Hedge End?
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Hedge End frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
A corner plot gives a timber front two faces and one chance to get the turn right. For Hedge End premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
If you trade after dark in Hedge End, the view in matters more than the sign. A warm, evenly lit interior with light on the back wall will usually do more than a brighter fascia, because it gives the eye somewhere to go.
Which applications might timber shopfronts in Hedge End involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Hedge End area, an application is then likely. The council confirms which side of that line a job falls on.
For Hedge End, the usual route for planning and advert applications is through Eastleigh Borough Council, and we confirm that when we visit.
How much could timber shopfronts in Hedge End cost you?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
| Town | Hedge End |
|---|---|
| Area | Hampshire |
| Postcode districts | SO30 |
| Planning authority | Eastleigh Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 116 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Hedge End
Do you make the joinery for Hedge End shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Hedge End from Great Barr by vetted teams working under S&K Glazing.
Can you fit a timber front around existing tiles in Hedge End?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Can you copy a timber shopfront I've seen in Hampshire?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Hedge End opening.
Does a new shopfront in the Hedge End area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
What rules apply to a fire exit door through a shopfront in the Hedge End area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.