For an entrance in Long Eaton that stays busy all day, the sensor set-up matters as much as the door. Done well, it opens for customers and ignores people walking past, which keeps the heat in the shop.
Measuring the opening is the easy part of a survey in Long Eaton. We also look at the beam above, the pavement fall and any meters or drains nearby.

How would we approach automatic sliding doors for your Long Eaton premises?
On a narrow Long Eaton frontage, parked leaves can leave too little opening. We'd look at a telescopic or single-slide set, and consider moving the door to one side to free up the display.
A deep recess is a gift for an automatic door. At Long Eaton premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Long Eaton premises on a slope look settled once that line is true.
What should you budget for automatic sliding doors in Long Eaton?
Until the survey is done, plan on £3,895 to £11,995 plus VAT per entrance. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
What consents could affect automatic sliding doors in Long Eaton?
For automatic sliding doors at premises in the Long Eaton area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Long Eaton premises normally go to Erewash Borough Council.
| Town | Long Eaton |
|---|---|
| Area | Derbyshire |
| Postcode districts | DE72, NG10, NG9 |
| Planning authority | Erewash Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 36 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Long Eaton
Who installs automatic doors in Long Eaton?
Vetted door teams working under S&K Glazing handle the fit and set-up, travelling from Great Barr. Your agreement is with S&K Glazing Limited, and one person stays your point of call.
What do I need to arrange for a door in Long Eaton?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
How noisy would an automatic door be at my Long Eaton shop?
A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.
Do I need planning permission to change a shopfront in the Long Eaton area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Does the Equality Act apply to a shop entrance in the Long Eaton area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.