Curtain walling gives Long Eaton premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
We measure your Long Eaton opening in person, at a time agreed with you first, so the visit fits around your trading.

What goes into getting curtain walling right in Long Eaton?
Where your frontage in Long Eaton faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
Unloading is worth thinking through early on any Long Eaton site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Long Eaton premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
Which applications might curtain walling in Long Eaton involve?
For curtain walling at premises in the Long Eaton area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Planning and advert applications for Long Eaton premises normally go to Erewash Borough Council. We check the position for your address at survey.
How much could curtain walling in Long Eaton cost you?
Allow £550 to £1,250 plus VAT per m². Size and specification set most of that figure for curtain walling, and the rest depends on what the survey finds on site.
| Town | Long Eaton |
|---|---|
| Area | Derbyshire |
| Postcode districts | DE72, NG10, NG9 |
| Planning authority | Erewash Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 36 miles |
| Survey | Free for new work |
Questions about curtain walling in Long Eaton
Will you coordinate with my architect or main contractor in Long Eaton?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
What should I send before a survey of my Long Eaton premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Can you replace failing curtain walling on premises in Long Eaton?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
What rules apply to a fire exit door through a shopfront in the Long Eaton area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Long Eaton area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.