Does your Swinton shop need a hands-free entrance? A well-set sliding door gives customers, pushchairs and wheelchairs a clear way in, without anything swinging into the street.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Swinton, because what sits behind them can change the drawing.

How do you design around the building when planning automatic sliding doors in Swinton?
A corner unit in Swinton can often move its entrance to the angle, where two directions of footfall meet. We'd look at a curved or canted door set, and check the wind on both streets before fixing the position.
Where a landlord in Swinton wants the frontage kept looking the same, a slim slider can sit behind the existing line. We'd draw the operator inside the fascia and give the landlord a clear elevation to approve.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Swinton premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What might automatic sliding doors cost in Swinton?
A sensible starting budget is £3,895 to £11,995 plus VAT per entrance. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
What permissions should you check for automatic sliding doors in Swinton?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for automatic sliding doors at premises in the Swinton area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Swinton premises normally go to Salford City Council. We check the position for your address at survey.
| Town | Swinton |
|---|---|
| Area | Greater Manchester |
| Postcode districts | M27, M28, M30, M6 |
| Planning authority | Salford City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 68 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Swinton
Can you match the door to my existing front in Greater Manchester?
Yes. Frames come in any RAL colour, and we'd line up the leaves with your existing mullions so the door doesn't look like an add-on.
How noisy would an automatic door be at my Swinton shop?
A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.
Will an automatic door fit my Swinton shop?
It depends on the width of the front and the depth at the head. A survey shows whether the parked leaves fit and where the operator can hide, and if a slider won't work we'd look at a powered swing door.
Do I need listed building consent for a shopfront in the Swinton area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Do roller shutters need planning permission in the Swinton area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.