Thinking about opening up your Minehead frontage? Start with where the stack will sit, because that one decision shapes the panel count, the track and the seating plan behind it.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What makes bi-folding shopfronts work well on Minehead premises?
In a parade in Minehead, a bi-fold has to sit politely when closed. We'd match the fascia line and keep a short fixed return at one end, so the set reads as part of the row instead of a gap in it.
For a restaurant group opening in Minehead, a bi-fold can carry the brand's look from site to site. We'd standardise the panel section, colour and hardware, then vary the panel count and stack side to suit each opening.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Minehead unit of that kind.
Could bi-folding shopfronts in Minehead need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for bi-folding shopfronts at premises in the Minehead area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Expect planning and advert applications here to go to Somerset Council in the normal way. We check what that means for your building when we survey it in Minehead.
How much should you set aside for bi-folding shopfronts in Minehead?
Allow £5,195 to £13,995 plus VAT for a typical opening. Size and specification set most of that figure for bi-folding shopfronts, and the rest depends on what the survey finds on site.
| Town | Minehead |
|---|---|
| Area | Somerset |
| Postcode districts | TA24 |
| Planning authority | Somerset Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 114 miles |
| Survey | Free for new work |
Questions about bi-folding shopfronts in Minehead
How many panels would my Minehead opening need?
It depends on the width and how you want the set to open. Most openings divide into leaves under 1m wide, and an odd number gives you a daily door, so we draw the options after the measure-up.
Can I have a timber bi-fold on my Minehead frontage?
Yes. Painted hardwood sets suit older premises across Somerset, though the panels are heavier and need a stiffer head than aluminium.
Can the threshold be level at my Minehead premises?
It can be close to level, depending on the floor and drainage. We'd check the levels at survey, because a track sitting flush with the pavement still needs somewhere for water to go.
What rules apply to a fire exit door through a shopfront in the Minehead area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Minehead area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.