Folding glass is a simple idea that rewards careful detailing. For Southwark premises, we check the head, floor and drainage before the panels are ordered.
Bring whatever you have to the survey in Southwark: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

How would we approach bi-folding shopfronts for your Southwark premises?
On a narrow Southwark unit, the stack can swallow the opening. We'd limit the set to three panels, or look at a single sliding leaf, so the opening you gain outweighs the width lost to parked frames.
Bi-folds suit a two-stage fit at Southwark premises that trade late. We'd take the old front out and fix the frame during closed hours, then hang and adjust the panels the following night, with temporary boarding in between.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Southwark premises on a slope look settled once that line is true.
What should you budget for bi-folding shopfronts in Southwark?
Guide price: £5,195 to £13,995 plus VAT for a typical opening. Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on bi-folding shopfronts.
What consents could affect bi-folding shopfronts in Southwark?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for bi-folding shopfronts at premises in the Southwark area, an application is then likely. The council confirms which side of that line a job falls on.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Southwark premises normally go to London Borough of Southwark.
| Town | Southwark |
|---|---|
| Area | Greater London |
| Postcode districts | SE1 |
| Planning authority | London Borough of Southwark |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 105 miles |
| Survey | Free for new work |
Questions about bi-folding shopfronts in Southwark
How many panels would my Southwark opening need?
It depends on the width and how you want the set to open. Most openings divide into leaves under 1m wide, and an odd number gives you a daily door, so we draw the options after the measure-up.
Can I have a timber bi-fold on my Southwark frontage?
Yes. Painted hardwood sets suit older premises across Greater London, though the panels are heavier and need a stiffer head than aluminium.
Which way should the panels fold at my Southwark premises?
Inward is the usual answer, since panels folded into the room stay clear of people on the pavement. We'd draw the options where the room allows, and you choose against your seating plan.
What rules apply to a fire exit door through a shopfront in the Southwark area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Southwark area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.