0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Bi-folding shopfronts
  4. Ware

Bi-folding shopfronts in Ware

Measured at your Ware premises, never guessed from a photograph.

A bi-folding front lets a restaurant, bar or showroom in Ware open fully to the street when the weather allows. We draw the panels, stack and threshold to your opening, so it closes up tight when the weather doesn't.

It helps if you can be there when we visit Ware, since five minutes walking the frontage together answers more than a long email.

Restaurant bi-folding shopfront with slim aluminium glazed panels stacked open to the pavement

What should you think about before commissioning bi-folding shopfronts in Ware?

A deep recess can host a bi-fold set back from the street, which keeps the panels clear of passers-by and creates a sheltered pocket by the door. At Ware premises with that depth, it's often the neatest layout.

For a restaurant group opening in Ware, a bi-fold can carry the brand's look from site to site. We'd standardise the panel section, colour and hardware, then vary the panel count and stack side to suit each opening.

Where the footway outside your Ware premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.

Who approves bi-folding shopfronts in Ware?

For bi-folding shopfronts at premises in the Ware area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

Expect planning and advert applications here to go to East Hertfordshire District Council in the normal way. We check what that means for your building when we survey it in Ware.

What is a realistic budget for bi-folding shopfronts in Ware?

We would budget £5,195 to £13,995 plus VAT for a typical opening. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Ware at a glance
TownWare
AreaHertfordshire
Postcode districtsSG12
Planning authorityEast Hertfordshire District Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 95 miles
SurveyFree for new work

Questions about bi-folding shopfronts in Ware

How many panels would my Ware opening need?

It depends on the width and how you want the set to open. Most openings divide into leaves under 1m wide, and an odd number gives you a daily door, so we draw the options after the measure-up.

Which way should the panels fold at my Ware premises?

Inward is the usual answer, since panels folded into the room stay clear of people on the pavement. We'd draw the options where the room allows, and you choose against your seating plan.

Can the threshold be level at my Ware premises?

It can be close to level, depending on the floor and drainage. We'd check the levels at survey, because a track sitting flush with the pavement still needs somewhere for water to go.

Do I need planning permission to change a shopfront in the Ware area?

Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.

Do roller shutters need planning permission in the Ware area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning bi-folding shopfronts in Ware?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price