Dimensions are signed off before anything is made. Across Ware and Hertfordshire, that one step removes most of the surprises from a shopfront job.
Bring whatever you have to the survey in Ware: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

Where should you begin with shopfront design in Ware?
If the pavement falls along your frontage, we survey the levels before drawing a line. Door threshold, stallriser and sill are then set from the real ground, which is where designs drawn from photographs tend to fail.
If your Ware unit sits in a terrace, we draw the neighbouring frontages on the elevation too. Your design then has to work in context, which is how people will actually see it.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Ware premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What price should you expect for shopfront design in Ware?
The guide for shopfront design is £495 to £2,495 plus VAT per frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
What sign-off might you need for shopfront design in Ware?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for shopfront work at premises in the Ware area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to East Hertfordshire District Council.
| Town | Ware |
|---|---|
| Area | Hertfordshire |
| Postcode districts | SG12 |
| Planning authority | East Hertfordshire District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 95 miles |
| Survey | Free for new work |
Questions about shopfront design in Ware
Can you design a frontage for Ware premises I have not taken on yet?
Yes. A survey and concept drawing can show what the unit could become and what it might cost. That can be useful before you sign anything.
Will you work with my shopfitter or architect in Ware?
Yes. We share drawings and coordinate the frontage with their ceiling, lighting and display plans. Your named contact stays the route for questions on the frontage.
Do I need a design service for a simple Ware shopfront?
Not always. Every job gets a measured survey and scale drawings anyway. The design service adds options, visuals and a full specification, which pay off when the look matters most.
What rules apply to a fire exit door through a shopfront in the Ware area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Ware area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.