Curtain walling gives Aberystwyth premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How would we approach curtain walling for your Aberystwyth premises?
Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.
If the ground floor of your Aberystwyth premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Aberystwyth premises on a slope look settled once that line is true.
What consents could affect curtain walling in Aberystwyth?
The existing rules still apply in Wales, because most of the Planning (Wales) Act 2026 is waiting for a commencement order. For curtain walling at premises in the Aberystwyth area, building work that materially affects the external appearance needs planning permission, while a true like-for-like replacement usually doesn't. The council confirms the current position.
Planning and advert applications for Aberystwyth premises normally go to Ceredigion County Council. We check the position for your address at survey.
What should you budget for curtain walling in Aberystwyth?
Allow £550 to £1,250 plus VAT per m². Size and specification set most of that figure for curtain walling, and the rest depends on what the survey finds on site.
| Town | Aberystwyth |
|---|---|
| Area | Dyfed |
| Postcode districts | SY23 |
| Planning authority | Ceredigion County Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 92 miles |
| Survey | Free for new work |
Does Ceredigion County Council publish shopfront guidance?
Yes, Aberystwyth Shopfront & Commercial Facade Design Guide (2013). It covers Aberystwyth only, so it doesn't apply across the whole council area. A few of the things it asks for:
- Stallrisers should not exceed 25% of total shopfront height, and glazing down to floor level is unlikely to be acceptable.
- Fascias should not exceed 20% of total shopfront height, and plastic fascias are not permitted.
- Internal retractable grilles are preferred, and external box roller shutters are allowed only in the most extreme circumstances.
Questions about curtain walling in Aberystwyth
Can you replace failing curtain walling on premises in Aberystwyth?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Who do I deal with during a curtain walling job in Aberystwyth?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Can part of an elevation in Aberystwyth be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Can a roller shutter go on a shop in the Aberystwyth area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.
When does a shop sign in the Aberystwyth area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.