0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Curtain walling
  4. Arnold

Curtain walling in Arnold

Designed for your opening in Arnold, fitted around your trading hours.

For a facade in Arnold, the grid matters more than any single pane. Mullions, transoms and spandrels are drawn together so the elevation reads as one composition from across the road.

It helps if you can be there when we visit Arnold, since five minutes walking the frontage together answers more than a long email.

Aluminium curtain walling with slim mullions across a two-storey commercial facade at dusk

How do you design around the building when planning curtain walling in Arnold?

If the frontage joins a neighbouring building in Arnold, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.

If the ground floor of your Arnold premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.

If your Arnold unit is narrow, a central door can split a small window into two weak ones. Moving the door to one side gives you a single confident pane, provided the layout inside still works.

What permissions should you check for curtain walling in Arnold?

Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for curtain walling at premises in the Arnold area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.

For Arnold, the usual route for planning and advert applications is through Gedling Borough Council, and we confirm that when we visit.

What might curtain walling cost in Arnold?

We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Arnold at a glance
TownArnold
AreaNottinghamshire
Postcode districtsNG3, NG4, NG5, NG6
Planning authorityGedling Borough Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 45 miles
SurveyFree for new work

Questions about curtain walling in Arnold

Is curtain walling right for a single-storey unit in Arnold?

Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.

Who do I deal with during a curtain walling job in Arnold?

You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.

Can part of an elevation in Arnold be done first?

Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.

Does a new shopfront in the Arnold area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

Do roller shutters need planning permission in the Arnold area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning curtain walling in Arnold?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price