For a facade in Blackwood, the grid matters more than any single pane. Mullions, transoms and spandrels are drawn together so the elevation reads as one composition from across the road.
It helps if you can be there when we visit Blackwood, since five minutes walking the frontage together answers more than a long email.

How do you design around the building when planning curtain walling in Blackwood?
If the frontage joins a neighbouring building in Blackwood, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
If your Blackwood premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Blackwood premises, since a shutter box or old beam may set the limit.
What might curtain walling cost in Blackwood?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What permissions should you check for curtain walling in Blackwood?
Like-for-like replacement usually needs no planning permission in Wales, because the external appearance isn't materially affected. Matching the existing materials, proportions and glass line is what keeps a job in that position. For curtain walling at premises in the Blackwood area, changing any of those usually means an application, which the council can confirm.
Expect planning and advert applications here to go to Caerphilly County Borough Council in the normal way. We check what that means for your building when we survey it in Blackwood.
| Town | Blackwood |
|---|---|
| Area | Gwent |
| Postcode districts | NP12 |
| Planning authority | Caerphilly County Borough Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 82 miles |
| Survey | Free for new work |
Questions about curtain walling in Blackwood
Can part of an elevation in Blackwood be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Who do I deal with during a curtain walling job in Blackwood?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Will you coordinate with my architect or main contractor in Blackwood?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Can a roller shutter go on a shop in the Blackwood area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.
Does a replacement shopfront in the Blackwood area need Building Regulations approval?
Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.