Curtain walling gives Bradford-on-Avon premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
It helps if you can be there when we visit Bradford-on-Avon, since five minutes walking the frontage together answers more than a long email.

What goes into getting curtain walling right in Bradford-on-Avon?
Where the building already has curtain walling, we test whether the brackets and framing can be reused. Keeping a sound frame and changing the glass and caps can give most of the result with far less disruption.
Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Bradford-on-Avon premises face south, the problem flips to reflections by day and fading stock.
How much could curtain walling in Bradford-on-Avon cost you?
As a working budget, use £550 to £1,250 plus VAT per m². Your place inside that range for curtain walling depends mostly on how much of the existing frontage can stay and how much has to be put right first.
Which applications might curtain walling in Bradford-on-Avon involve?
For curtain walling at premises in the Bradford-on-Avon area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
For Bradford-on-Avon, the usual route for planning and advert applications is through Wiltshire Council, and we confirm that when we visit.
| Town | Bradford-on-Avon |
|---|---|
| Area | Wiltshire |
| Postcode districts | BA15 |
| Planning authority | Wiltshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 84 miles |
| Survey | Free for new work |
Questions about curtain walling in Bradford-on-Avon
Is curtain walling right for a single-storey unit in Bradford-on-Avon?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can you match the frames already on my Bradford-on-Avon building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
What should I send before a survey of my Bradford-on-Avon premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Do I need listed building consent for a shopfront in the Bradford-on-Avon area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does a new shopfront in the Bradford-on-Avon area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.