Replacing tired glazing on Melksham premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.
Nothing gets ordered off the back of a survey in Melksham, because its job is to give us the numbers to draw and price from.

What should you think about before commissioning curtain walling in Melksham?
If your Melksham premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
Unloading is worth thinking through early on any Melksham site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Melksham unit of that kind.
What is a realistic budget for curtain walling in Melksham?
Guide price: £550 to £1,250 plus VAT per m². Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on curtain walling.
Who approves curtain walling in Melksham?
For curtain walling at premises in the Melksham area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Melksham applications for planning permission or advertisement consent are normally handled by Wiltshire Council. Our survey includes a check of the position for your address.
| Town | Melksham |
|---|---|
| Area | Wiltshire |
| Postcode districts | SN12 |
| Planning authority | Wiltshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 82 miles |
| Survey | Free for new work |
Questions about curtain walling in Melksham
Is curtain walling right for a single-storey unit in Melksham?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can you replace failing curtain walling on premises in Melksham?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Can part of an elevation in Melksham be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Do I need planning permission to change a shopfront in the Melksham area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Does a new shopfront in the Melksham area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.