Replacing tired glazing on Burgess Hill premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.
Surveys for Burgess Hill are booked with you directly. Tell us your quieter days and we'll work around them.

What should you think about before commissioning curtain walling in Burgess Hill?
If the frontage joins a neighbouring building in Burgess Hill, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
Unloading is worth thinking through early on any Burgess Hill site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Burgess Hill premises on a slope look settled once that line is true.
Who approves curtain walling in Burgess Hill?
For curtain walling at premises in the Burgess Hill area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Burgess Hill applications for planning permission or advertisement consent are normally handled by Mid Sussex District Council. Our survey includes a check of the position for your address.
What is a realistic budget for curtain walling in Burgess Hill?
The guide for curtain walling is £550 to £1,250 plus VAT per m². Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Town | Burgess Hill |
|---|---|
| Area | West Sussex |
| Postcode districts | RH15 |
| Planning authority | Mid Sussex District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 134 miles |
| Survey | Free for new work |
Questions about curtain walling in Burgess Hill
Will you coordinate with my architect or main contractor in Burgess Hill?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
What should I send before a survey of my Burgess Hill premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Who do I deal with during a curtain walling job in Burgess Hill?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Do I need listed building consent for a shopfront in the Burgess Hill area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
What rules apply to a fire exit door through a shopfront in the Burgess Hill area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.