0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Curtain walling
  4. Hove

Curtain walling in Hove

Measured at your Hove premises, never guessed from a photograph.

Curtain walling gives Hove premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.

A survey in Hove usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Aluminium curtain walling with slim mullions across a two-storey commercial facade at dusk

What goes into getting curtain walling right in Hove?

If the ground floor of your Hove premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.

If your Hove premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.

On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Hove premises face south, the problem flips to reflections by day and fading stock.

Which applications might curtain walling in Hove involve?

For curtain walling at premises in the Hove area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

Planning and advert applications for Hove premises normally go to Brighton and Hove City Council. We check the position for your address at survey.

How much could curtain walling in Hove cost you?

We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Hove at a glance
TownHove
AreaEast Sussex
Postcode districtsBN1, BN2, BN3, BN41
Planning authorityBrighton and Hove City Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 140 miles
SurveyFree for new work

Questions about curtain walling in Hove

Is curtain walling right for a single-storey unit in Hove?

Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.

Can part of an elevation in Hove be done first?

Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.

Will you coordinate with my architect or main contractor in Hove?

Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.

Do I need planning permission to change a shopfront in the Hove area?

Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.

Do roller shutters need planning permission in the Hove area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning curtain walling in Hove?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price