Daylight deep into the floor plate is often what makes curtain walling worth the money. For Rottingdean premises we weigh that against solar gain and glare, so the glass works in July as well as in January.
A survey in Rottingdean usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How would we approach curtain walling for your Rottingdean premises?
Where the elevation faces south or west, solar control glass can do more for comfort than any blind. If it looks north, we would usually keep the glass clear and neutral, so the building does not turn dull on a grey day.
Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.
If your Rottingdean unit is narrow, a central door can split a small window into two weak ones. Moving the door to one side gives you a single confident pane, provided the layout inside still works.
What should you budget for curtain walling in Rottingdean?
As a working budget, use £550 to £1,250 plus VAT per m². Your place inside that range for curtain walling depends mostly on how much of the existing frontage can stay and how much has to be put right first.
What consents could affect curtain walling in Rottingdean?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for curtain walling at premises in the Rottingdean area, an application is then likely. The council confirms which side of that line a job falls on.
For Rottingdean, the usual route for planning and advert applications is through Brighton and Hove City Council, and we confirm that when we visit.
| Town | Rottingdean |
|---|---|
| Area | East Sussex |
| Postcode districts | BN1, BN10, BN2 |
| Planning authority | Brighton and Hove City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 144 miles |
| Survey | Free for new work |
Questions about curtain walling in Rottingdean
Is curtain walling right for a single-storey unit in Rottingdean?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can you match the frames already on my Rottingdean building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
What should I send before a survey of my Rottingdean premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
What rules apply to a fire exit door through a shopfront in the Rottingdean area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Rottingdean area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.