Curtain walling gives Burngreave premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
Surveys for Burngreave are booked with you directly. Tell us your quieter days and we'll work around them.

What goes into getting curtain walling right in Burngreave?
Where your frontage in Burngreave faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
If the ground floor of your Burngreave premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Burngreave premises.
Which applications might curtain walling in Burngreave involve?
For curtain walling at premises in the Burngreave area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Burngreave applications for planning permission or advertisement consent are normally handled by Sheffield City Council. Our survey includes a check of the position for your address.
How much could curtain walling in Burngreave cost you?
The guide for curtain walling is £550 to £1,250 plus VAT per m². Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Town | Burngreave |
|---|---|
| Area | South Yorkshire |
| Postcode districts | S1, S2, S3, S4 |
| Planning authority | Sheffield City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 61 miles |
| Survey | Free for new work |
Questions about curtain walling in Burngreave
Will you coordinate with my architect or main contractor in Burngreave?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Is curtain walling right for a single-storey unit in Burngreave?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can you match the frames already on my Burngreave building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
What rules apply to a fire exit door through a shopfront in the Burngreave area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need planning permission to change a shopfront in the Burngreave area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.