0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Perforated roller shutters
  4. Burngreave

Perforated roller shutters in Burngreave

Measured at your Burngreave premises, never guessed from a photograph.

Perforated roller shutters give Burngreave premises out-of-hours protection while light and the display still show through. We look first at whether the shutter should sit inside the glass, since that often gives a better frontage.

Please have keys to any meter cupboards and shutter housings to hand when we survey in Burngreave, because what sits behind them can change the drawing.

Perforated aluminium roller shutter over a lit shop display, seen from the pavement after dark

What should you think about before commissioning perforated roller shutters in Burngreave?

If your Burngreave unit has an old external shutter, we check whether the box can come off and leave a clean fascia. That single change can lift a frontage more than a new sign.

On premises with a recessed entrance, the shutter line needs careful thought. We usually bring it forward to the building line, or close the recess separately, so the doorway does not become a hiding place.

If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Burngreave unit of that kind.

Who approves perforated roller shutters in Burngreave?

For perforated roller shutters at premises in the Burngreave area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

Planning and advert applications for Burngreave premises normally go to Sheffield City Council. We check the position for your address at survey.

What is a realistic budget for perforated roller shutters in Burngreave?

Allow £1,695 to £4,495 plus VAT per shutter. Size and specification set most of that figure for perforated roller shutters, and the rest depends on what the survey finds on site.

Burngreave at a glance
TownBurngreave
AreaSouth Yorkshire
Postcode districtsS1, S2, S3, S4
Planning authoritySheffield City Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 61 miles
SurveyFree for new work

Questions about perforated roller shutters in Burngreave

What controls can a shutter have?

A key switch, a wall button or a remote are the usual choices, each with a manual override. Many shops use a key switch at the door, so closing up needs someone present.

Do you remove old shutters in Burngreave?

Yes. Taking out the old curtain, box and guides, then making good the frontage, is shown as its own line in the itemised quotation.

Can you fit an internal shutter on my Burngreave premises?

Usually, yes. We check for ceiling space, a clear path behind the window and a solid fixing for the guides. Where space is tight, a slim box or a smaller display can make it work.

Do I need listed building consent for a shopfront in the Burngreave area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Do roller shutters need planning permission in the Burngreave area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning perforated roller shutters in Burngreave?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price