A double-height entrance in Colchester deserves more than a stretched shopfront. Deeper aluminium sections carry the span, with sightlines kept as slim as the wind load allows.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What makes curtain walling work well on Colchester premises?
Where your frontage in Colchester faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
If the ground floor of your Colchester premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Colchester unit of that kind.
Could curtain walling in Colchester need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Colchester area: a planning application, or work that doesn't materially affect the external appearance.
Expect planning and advert applications here to go to Colchester Borough Council in the normal way. We check what that means for your building when we survey it in Colchester.
How much should you set aside for curtain walling in Colchester?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Colchester |
|---|---|
| Area | Essex |
| Postcode districts | CO1, CO2, CO3, CO4 |
| Planning authority | Colchester Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 128 miles |
| Survey | Free for new work |
Questions about curtain walling in Colchester
Can you replace failing curtain walling on premises in Colchester?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Can part of an elevation in Colchester be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Who do I deal with during a curtain walling job in Colchester?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Do I need listed building consent for a shopfront in the Colchester area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does a new shopfront in the Colchester area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.