Timber gives a shopfront in Colchester something metal can't: real depth, cast shadows and mouldings you can run your hand along. We draw each front to the measured opening and make it to those signed-off dimensions.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What should you think about before commissioning timber shopfronts in Colchester?
A brand rollout can include timber, as long as the details repeat. For a branch in Colchester we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
Timber fits a night programme better than you'd think, since most of the joinery is made elsewhere. For a unit in Colchester that can't close by day, we'd fit the frame in stages at night and leave painting until the end, once the dust has gone.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Colchester premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
Who approves timber shopfronts in Colchester?
For timber shopfronts at premises in the Colchester area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Expect planning and advert applications here to go to Colchester Borough Council in the normal way. We check what that means for your building when we survey it in Colchester.
What is a realistic budget for timber shopfronts in Colchester?
As a working budget, use £3,995 to £13,995 plus VAT for a typical frontage. Your place inside that range for timber shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | Colchester |
|---|---|
| Area | Essex |
| Postcode districts | CO1, CO2, CO3, CO4 |
| Planning authority | Colchester Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 128 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Colchester
Can you copy a timber shopfront I've seen in Essex?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Colchester opening.
Can you fit a timber front around existing tiles in Colchester?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Will timber suffer on my Colchester frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Do I need planning permission to change a shopfront in the Colchester area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Does a new shopfront in the Colchester area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.