From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Flint and the surrounding parts of Clwyd. One contract covers the frame, the glass and the junction with the shopfront below.
A survey in Flint usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Where should you begin with curtain walling in Flint?
Unloading is worth thinking through early on any Flint site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
Where the building already has curtain walling, we test whether the brackets and framing can be reused. Keeping a sound frame and changing the glass and caps can give most of the result with far less disruption.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Flint unit of that kind.
What sign-off might you need for curtain walling in Flint?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for curtain walling at premises in the Flint area as much as for a full new frontage. The council confirms how the test applies to your site.
For Flint, the usual route for planning and advert applications is through Flintshire County Council, and we confirm that when we visit.
What price should you expect for curtain walling in Flint?
Allow £550 to £1,250 plus VAT per m². Size and specification set most of that figure for curtain walling, and the rest depends on what the survey finds on site.
| Town | Flint |
|---|---|
| Area | Clwyd |
| Postcode districts | CH6 |
| Planning authority | Flintshire County Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 70 miles |
| Survey | Free for new work |
Questions about curtain walling in Flint
Can part of an elevation in Flint be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Will you coordinate with my architect or main contractor in Flint?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
How disruptive is curtain walling for neighbours in Flint?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
When does a shop sign in the Flint area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.
Who decides listed building consent for a shopfront in the Flint area?
Planning authorities and Welsh Ministers share control of listed building consent in Wales, under the Historic Environment (Wales) Act 2023. Cadw is the national body, and the 1990 Act no longer applies. Ask the council where an application should start.