Showrooms, hotels and offices in Mold can reach the point where glass has to pass a floor edge, and that is where curtain walling takes over from a shopfront. You see every mullion and transom on scale drawings before anything is ordered.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What should you think about before commissioning curtain walling in Mold?
If the ground floor of your Mold premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Where the elevation faces south or west, solar control glass can do more for comfort than any blind. If it looks north, we would usually keep the glass clear and neutral, so the building does not turn dull on a grey day.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Mold premises, since a shutter box or old beam may set the limit.
Who approves curtain walling in Mold?
Going by Part 42 of the 1995 Order as inserted in 2014, Wales has no permitted development route for changing a shopfront. The right covers A1 and A2 premises, but it excludes creating, altering or replacing a shopfront, or fitting or replacing a security grill or shutter on one, and it doesn't apply on Article 1(5) land. For curtain walling at premises in the Mold area, that leaves a planning application, or work that leaves the appearance materially unchanged.
Expect planning and advert applications here to go to Flintshire County Council in the normal way. We check what that means for your building when we survey it in Mold.
What is a realistic budget for curtain walling in Mold?
A sensible starting budget is £550 to £1,250 plus VAT per m². What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Mold |
|---|---|
| Area | Clwyd |
| Postcode districts | CH7 |
| Planning authority | Flintshire County Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 67 miles |
| Survey | Free for new work |
Questions about curtain walling in Mold
What should I send before a survey of my Mold premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Can part of an elevation in Mold be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
How disruptive is curtain walling for neighbours in Mold?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
Does a replacement shopfront in the Mold area need Building Regulations approval?
Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.
What access duty applies to a shop in the Mold area?
The Equality Act 2010 applies, in Wales as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it covers disabled people generally. A feature that meets a design standard is generally protected for 10 years.