0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Frameless glass doors
  4. Mold

Frameless glass doors in Mold

Sightlines, proportion and finish worked out for your Mold building.

Across Clwyd, a frameless door is often the simplest way to modernise an entrance. For Mold premises, we look first at the floor, because the spring box needs depth to sit in.

Please have keys to any meter cupboards and shutter housings to hand when we survey in Mold, because what sits behind them can change the drawing.

Pair of frameless toughened glass doors with long brushed steel pull handles at a shop entrance

What goes into getting frameless glass doors right in Mold?

On a corner plot in Mold, an entrance set across the angle can catch footfall from both streets. We'd check which way the door swings against the wind on each side before settling the hinge position.

In a deep recess, a frameless door gets natural shelter and can sit back from the street. At Mold premises with that layout, we'd choose glass side returns so the recess stays bright and the door stays obvious.

If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Mold unit of that kind.

How much could frameless glass doors in Mold cost you?

A sensible starting budget is £1,495 to £4,495 plus VAT per door set. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.

Which applications might frameless glass doors in Mold involve?

Going by Part 42 of the 1995 Order as inserted in 2014, Wales has no permitted development route for changing a shopfront. The right covers A1 and A2 premises, but it excludes creating, altering or replacing a shopfront, or fitting or replacing a security grill or shutter on one, and it doesn't apply on Article 1(5) land. For frameless glass doors at premises in the Mold area, that leaves a planning application, or work that leaves the appearance materially unchanged.

Planning and advert applications for Mold premises normally go to Flintshire County Council. We check the position for your address at survey.

Mold at a glance
TownMold
AreaClwyd
Postcode districtsCH7
Planning authorityFlintshire County Council
Building approvalBuilding Regulations (Approved Documents for Wales)
Distance from Great BarrAbout 67 miles
SurveyFree for new work

Questions about frameless glass doors in Mold

Can you reuse my existing floor spring in Mold?

Sometimes, if it is sound and suits the new leaf. We'd test it at survey, because an old spring under a heavier door tends to fail early.

Can my Mold premises take a frameless glass door?

Most can, once the floor and opening have been checked. The survey shows whether a floor spring will fit, and if not, a concealed closer in a transom does the same job.

Will a glass door be safe with children around in my Mold shop?

Toughened glass is strong and breaks into small pieces, so it is a good choice for a family-facing shop. The main risks are finger traps at the hinge side, which careful spring settings and guards can reduce.

Can a roller shutter go on a shop in the Mold area without planning permission?

Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.

Can a shop fire exit in the Mold area use a sliding door?

No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.

Planning frameless glass doors in Mold?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price