A restaurant, bar or salon in Mold needs a sign that works as hard at nine in the evening as it does at noon. We set the colour temperature and output to suit your fascia, your interior and the street.
Surveys for Mold are booked with you directly. Tell us your quieter days and we'll work around them.

What goes into getting illuminated signage right in Mold?
Where the frontage faces a wide road, face-lit letters can carry further than halo lighting. On a narrower street the softer option usually reads well enough and looks more refined.
If your Mold fascia is dark and glossy, halo light may disappear into it. We would test a sample or suggest a matt panel behind the letters, so the glow has something to land on.
If you trade after dark in Mold, the view in matters more than the sign. A warm, evenly lit interior with light on the back wall will usually do more than a brighter fascia, because it gives the eye somewhere to go.
Which applications might illuminated signage in Mold involve?
The existing rules still apply in Wales, because most of the Planning (Wales) Act 2026 is waiting for a commencement order. For illuminated signage at premises in the Mold area, building work that materially affects the external appearance needs planning permission, while a true like-for-like replacement usually doesn't. The council confirms the current position.
In Wales, adding light takes a sign out of Class 5, which allows illumination only for medical-type notices, and into Class 4B. For premises in the Mold area, that generally means halo or character-only lighting, static, with the lowest part at least 2.5m up. Any other lighting needs advertisement consent.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Flintshire County Council.
How much could illuminated signage in Mold cost you?
The guide for illuminated signage is £895 to £3,995 plus VAT per sign. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Town | Mold |
|---|---|
| Area | Clwyd |
| Postcode districts | CH7 |
| Planning authority | Flintshire County Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 67 miles |
| Survey | Free for new work |
Questions about illuminated signage in Mold
How will I know what my Mold sign looks like at night?
We draw it on your elevation and describe the lighting effect in the specification, and a sample letter can be tested on your fascia where that helps. Colour temperature and output are agreed before manufacture.
Will a lit sign in Mold cost much to run?
Very little. A typical LED sign uses about the same power as a few domestic lamps, and a timer trims that further. Occasional driver changes are the larger long-term cost.
What happens if a lit letter fails on my Mold sign?
Usually a single LED driver or a damaged connection is to blame, and it can be traced from the access point. That is why drivers are placed where they can be reached without taking the sign down.
When does a shop sign in the Mold area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.
Is planning permission needed for a new shopfront in the Mold area?
Usually yes, if the work materially affects the external appearance, because Wales has no permitted development route for changing a shopfront. Most of the Planning (Wales) Act 2026 hasn't been commenced yet, so the existing rules apply. A true like-for-like replacement usually avoids an application, and the council confirms the position.