Landlords, shopfitters and architects working in Mold can use the service as a full package or for one difficult detail. Either way the drawings start from a measured survey.
Surveys for Mold are booked with you directly. Tell us your quieter days and we'll work around them.

How do you design around the building when planning shopfront design in Mold?
For a corner unit in Mold, we design both elevations as one. The return, the door position and the sign all depend on which street brings your customers.
Should several trades be involved in your fit-out, we coordinate the frontage with the shopfitter's drawings. Ceiling lines, display depths and shutter boxes then agree with each other before work starts.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Mold premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What might shopfront design cost in Mold?
The guide for shopfront design is £495 to £2,495 plus VAT per frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
What permissions should you check for shopfront design in Mold?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for shopfront work at premises in the Mold area as much as for a full new frontage. The council confirms how the test applies to your site.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Flintshire County Council.
| Town | Mold |
|---|---|
| Area | Clwyd |
| Postcode districts | CH7 |
| Planning authority | Flintshire County Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 67 miles |
| Survey | Free for new work |
Questions about shopfront design in Mold
Can the work on my Mold frontage be designed in phases?
Yes. We can draw the complete frontage first, then split it into stages, so a new sign and paint now will still suit a new shopfront later.
What do you need from me before designing for my Mold premises?
The address, brand files and a few frontages you admire are a good start. Tell us your rough budget too, because it helps us focus on what can be built.
Do I need a design service for a simple Mold shopfront?
Not always. Every job gets a measured survey and scale drawings anyway. The design service adds options, visuals and a full specification, which pay off when the look matters most.
Is planning permission needed for a new shopfront in the Mold area?
Usually yes, if the work materially affects the external appearance, because Wales has no permitted development route for changing a shopfront. Most of the Planning (Wales) Act 2026 hasn't been commenced yet, so the existing rules apply. A true like-for-like replacement usually avoids an application, and the council confirms the position.
When does a shop sign in the Mold area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.