Daylight deep into the floor plate is often what makes curtain walling worth the money. For Morden premises we weigh that against solar gain and glare, so the glass works in July as well as in January.
It helps if you can be there when we visit Morden, since five minutes walking the frontage together answers more than a long email.

What should you think about before commissioning curtain walling in Morden?
Where the building already has curtain walling, we test whether the brackets and framing can be reused. Keeping a sound frame and changing the glass and caps can give most of the result with far less disruption.
If the ground floor of your Morden premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Morden unit of that kind.
What is a realistic budget for curtain walling in Morden?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Who approves curtain walling in Morden?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for curtain walling at premises in the Morden area, an application is then likely. The council confirms which side of that line a job falls on.
For Morden, the usual route for planning and advert applications is through London Borough of Merton, and we confirm that when we visit.
| Town | Morden |
|---|---|
| Area | Greater London |
| Postcode districts | CR4, SM4, SW19, SW20 |
| Planning authority | London Borough of Merton |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 108 miles |
| Survey | Free for new work |
Questions about curtain walling in Morden
Can you replace failing curtain walling on premises in Morden?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Will you coordinate with my architect or main contractor in Morden?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Is curtain walling right for a single-storey unit in Morden?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Do I need listed building consent for a shopfront in the Morden area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
What rules apply to a fire exit door through a shopfront in the Morden area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.