Anyone weighing up a glazed elevation in Romford needs frame, glass and fixings designed together. All three sit under one contract with S&K Glazing, with a named contact from survey to handover.
Nothing gets ordered off the back of a survey in Romford, because its job is to give us the numbers to draw and price from.

How do you design around the building when planning curtain walling in Romford?
Where the elevation faces south or west, solar control glass can do more for comfort than any blind. If it looks north, we would usually keep the glass clear and neutral, so the building does not turn dull on a grey day.
Where your frontage in Romford faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Romford parade, keep the line and win attention with lettering, lighting and what's in the window.
What might curtain walling cost in Romford?
Until the survey is done, plan on £550 to £1,250 plus VAT per m². Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
What permissions should you check for curtain walling in Romford?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for curtain walling at premises in the Romford area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to London Borough of Havering.
| Town | Romford |
|---|---|
| Area | Greater London |
| Postcode districts | RM1, RM11, RM2, RM7 |
| Planning authority | London Borough of Havering |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 112 miles |
| Survey | Free for new work |
Questions about curtain walling in Romford
How disruptive is curtain walling for neighbours in Romford?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
What should I send before a survey of my Romford premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Will you coordinate with my architect or main contractor in Romford?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
What rules apply to a fire exit door through a shopfront in the Romford area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Romford area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.