Colour and craft do the work on a timber front in Romford. We test paint on your actual frontage, draw any moulding that matters at full size, and keep every dimension on paper for you to sign off.
Nothing gets ordered off the back of a survey in Romford, because its job is to give us the numbers to draw and price from.

How would we approach timber shopfronts for your Romford premises?
If your Romford premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
A corner plot gives a timber front two faces and one chance to get the turn right. For Romford premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Romford premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What should you budget for timber shopfronts in Romford?
Until the survey is done, plan on £3,995 to £13,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
What consents could affect timber shopfronts in Romford?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Romford area, an application is then likely. The council confirms which side of that line a job falls on.
Romford applications for planning permission or advertisement consent are normally handled by London Borough of Havering. Our survey includes a check of the position for your address.
| Town | Romford |
|---|---|
| Area | Greater London |
| Postcode districts | RM1, RM11, RM2, RM7 |
| Planning authority | London Borough of Havering |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 112 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Romford
Do you make the joinery for Romford shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Romford from Great Barr by vetted teams working under S&K Glazing.
Will timber suffer on my Romford frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Can a timber front take a modern sign in Romford?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Does a shop sign in the Romford area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.
Does the Equality Act apply to a shop entrance in the Romford area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.