From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Southend-on-Sea and the surrounding parts of Essex. One contract covers the frame, the glass and the junction with the shopfront below.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How do you design around the building when planning curtain walling in Southend-on-Sea?
If your Southend-on-Sea premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
Where your frontage in Southend-on-Sea faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
If your Southend-on-Sea unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
What might curtain walling cost in Southend-on-Sea?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What permissions should you check for curtain walling in Southend-on-Sea?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Southend-on-Sea area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Southend-on-Sea premises normally go to Southend-on-Sea Borough Council. We check the position for your address at survey.
| Town | Southend-on-Sea |
|---|---|
| Area | Essex |
| Postcode districts | SS0, SS1, SS2, SS9 |
| Planning authority | Southend-on-Sea Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 132 miles |
| Survey | Free for new work |
Questions about curtain walling in Southend-on-Sea
Can you replace failing curtain walling on premises in Southend-on-Sea?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Who do I deal with during a curtain walling job in Southend-on-Sea?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
How disruptive is curtain walling for neighbours in Southend-on-Sea?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
Do I need listed building consent for a shopfront in the Southend-on-Sea area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does a shop sign in the Southend-on-Sea area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.