Curtain walling gives Surbiton premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
Your survey is where the price gets real, because widths, heights, levels and access are all taken on site in Surbiton.

How would we approach curtain walling for your Surbiton premises?
If the frontage joins a neighbouring building in Surbiton, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
Unloading is worth thinking through early on any Surbiton site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Surbiton premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What should you budget for curtain walling in Surbiton?
Guide price: £550 to £1,250 plus VAT per m². Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on curtain walling.
What consents could affect curtain walling in Surbiton?
For curtain walling at premises in the Surbiton area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Surbiton premises normally go to Royal Borough of Kingston upon Thames.
| Town | Surbiton |
|---|---|
| Area | Greater London |
| Postcode districts | KT1, KT5, KT6, KT7 |
| Planning authority | Royal Borough of Kingston upon Thames |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 105 miles |
| Survey | Free for new work |
Questions about curtain walling in Surbiton
Can you replace failing curtain walling on premises in Surbiton?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Is curtain walling right for a single-storey unit in Surbiton?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can part of an elevation in Surbiton be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Do roller shutters need planning permission in the Surbiton area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does the Equality Act apply to a shop entrance in the Surbiton area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.