Anyone weighing up a glazed elevation in Kingston upon Thames needs frame, glass and fixings designed together. All three sit under one contract with S&K Glazing, with a named contact from survey to handover.
Nothing gets ordered off the back of a survey in Kingston upon Thames, because its job is to give us the numbers to draw and price from.

What makes curtain walling work well on Kingston upon Thames premises?
If the frontage joins a neighbouring building in Kingston upon Thames, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
Where your frontage in Kingston upon Thames faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
Where the footway outside your Kingston upon Thames premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
How much should you set aside for curtain walling in Kingston upon Thames?
Until the survey is done, plan on £550 to £1,250 plus VAT per m². Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
Could curtain walling in Kingston upon Thames need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for curtain walling at premises in the Kingston upon Thames area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Kingston upon Thames applications for planning permission or advertisement consent are normally handled by Royal Borough of Kingston upon Thames. Our survey includes a check of the position for your address.
| Town | Kingston upon Thames |
|---|---|
| Area | Greater London |
| Postcode districts | KT1, KT2, KT5, KT6 |
| Planning authority | Royal Borough of Kingston upon Thames |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 104 miles |
| Survey | Free for new work |
Questions about curtain walling in Kingston upon Thames
Is curtain walling right for a single-storey unit in Kingston upon Thames?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Who do I deal with during a curtain walling job in Kingston upon Thames?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Can you match the frames already on my Kingston upon Thames building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Do roller shutters need planning permission in the Kingston upon Thames area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Do I need planning permission to change a shopfront in the Kingston upon Thames area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.