0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Curtain walling
  4. Hampton Wick

Curtain walling in Hampton Wick

One itemised price and one named contact for Hampton Wick premises.

Showrooms, hotels and offices in Hampton Wick can reach the point where glass has to pass a floor edge, and that is where curtain walling takes over from a shopfront. You see every mullion and transom on scale drawings before anything is ordered.

It helps if you can be there when we visit Hampton Wick, since five minutes walking the frontage together answers more than a long email.

Aluminium curtain walling with slim mullions across a two-storey commercial facade at dusk

What should you think about before commissioning curtain walling in Hampton Wick?

If the ground floor of your Hampton Wick premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.

Unloading is worth thinking through early on any Hampton Wick site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.

Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Hampton Wick premises, since a shutter box or old beam may set the limit.

Who approves curtain walling in Hampton Wick?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for curtain walling at premises in the Hampton Wick area, an application is then likely. The council confirms which side of that line a job falls on.

Planning and advert applications for Hampton Wick premises normally go to London Borough of Richmond upon Thames. We check the position for your address at survey.

What is a realistic budget for curtain walling in Hampton Wick?

We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Hampton Wick at a glance
TownHampton Wick
AreaGreater London
Postcode districtsKT1, KT2, TW1, TW11
Planning authorityLondon Borough of Richmond upon Thames
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 103 miles
SurveyFree for new work

Does London Borough of Richmond upon Thames publish shopfront guidance?

Yes, Shopfronts: Supplementary Planning Document (2010). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • The fascia should be no deeper than the cornice and architrave combined, and no more than one-fifth of total shopfront height.
  • External roller shutters are unlikely to be permitted, and internal grilles are the only acceptable security form in conservation areas and on listed buildings.
  • Internally lit box fascia signs will usually be resisted, with externally lit fascias generally preferred.

Read our summary of the Richmond upon Thames guidance

Questions about curtain walling in Hampton Wick

Is curtain walling right for a single-storey unit in Hampton Wick?

Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.

What should I send before a survey of my Hampton Wick premises?

The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.

How disruptive is curtain walling for neighbours in Hampton Wick?

Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.

Does a new shopfront in the Hampton Wick area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

What rules apply to a fire exit door through a shopfront in the Hampton Wick area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Planning curtain walling in Hampton Wick?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price