A slim framed slider can sit inside an existing Hampton Wick frontage with little change to the outside. The drive hides behind the fascia, and the leaves line up with the screens either side.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Hampton Wick, because what sits behind them can change the drawing.

Where should you begin with automatic sliding doors in Hampton Wick?
In a parade in Hampton Wick with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
A corner unit in Hampton Wick can often move its entrance to the angle, where two directions of footfall meet. We'd look at a curved or canted door set, and check the wind on both streets before fixing the position.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Hampton Wick premises on a slope look settled once that line is true.
What price should you expect for automatic sliding doors in Hampton Wick?
Allow £3,895 to £11,995 plus VAT per entrance. Size and specification set most of that figure for automatic sliding doors, and the rest depends on what the survey finds on site.
What sign-off might you need for automatic sliding doors in Hampton Wick?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for automatic sliding doors at premises in the Hampton Wick area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Hampton Wick premises normally go to London Borough of Richmond upon Thames. We check the position for your address at survey.
| Town | Hampton Wick |
|---|---|
| Area | Greater London |
| Postcode districts | KT1, KT2, TW1, TW11 |
| Planning authority | London Borough of Richmond upon Thames |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 103 miles |
| Survey | Free for new work |
Does London Borough of Richmond upon Thames publish shopfront guidance?
Yes, Shopfronts: Supplementary Planning Document (2010). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- The fascia should be no deeper than the cornice and architrave combined, and no more than one-fifth of total shopfront height.
- External roller shutters are unlikely to be permitted, and internal grilles are the only acceptable security form in conservation areas and on listed buildings.
- Internally lit box fascia signs will usually be resisted, with externally lit fascias generally preferred.
Questions about automatic sliding doors in Hampton Wick
Who installs automatic doors in Hampton Wick?
Vetted door teams working under S&K Glazing handle the fit and set-up, travelling from Great Barr. Your agreement is with S&K Glazing Limited, and one person stays your point of call.
Will the door keep opening for passers-by in Hampton Wick?
Not if it is set up properly. We narrow the sensor field on site and test it against real footfall, so only people heading for the door trigger it.
What will people on the street see at my Hampton Wick entrance?
Ideally, very little. The drive sits behind the fascia, the leaves line up with the screens beside them, and the frame colour matches the rest of your front.
Do roller shutters need planning permission in the Hampton Wick area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a new shopfront in the Hampton Wick area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.