Showrooms, hotels and offices in Tonbridge can reach the point where glass has to pass a floor edge, and that is where curtain walling takes over from a shopfront. You see every mullion and transom on scale drawings before anything is ordered.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How would we approach curtain walling for your Tonbridge premises?
If your Tonbridge premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Tonbridge unit of that kind.
What consents could affect curtain walling in Tonbridge?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for curtain walling at premises in the Tonbridge area, an application is then likely. The council confirms which side of that line a job falls on.
Expect planning and advert applications here to go to Tonbridge and Malling Borough Council in the normal way. We check what that means for your building when we survey it in Tonbridge.
What should you budget for curtain walling in Tonbridge?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Tonbridge |
|---|---|
| Area | Kent |
| Postcode districts | TN10, TN11, TN9 |
| Planning authority | Tonbridge and Malling Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 132 miles |
| Survey | Free for new work |
Questions about curtain walling in Tonbridge
How disruptive is curtain walling for neighbours in Tonbridge?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
What should I send before a survey of my Tonbridge premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Is curtain walling right for a single-storey unit in Tonbridge?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Do roller shutters need planning permission in the Tonbridge area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a new shopfront in the Tonbridge area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.