From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Tyldesley and the surrounding parts of Greater Manchester. One contract covers the frame, the glass and the junction with the shopfront below.
A survey in Tyldesley usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How do you design around the building when planning curtain walling in Tyldesley?
Where the building already has curtain walling, we test whether the brackets and framing can be reused. Keeping a sound frame and changing the glass and caps can give most of the result with far less disruption.
Unloading is worth thinking through early on any Tyldesley site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Tyldesley premises on a slope look settled once that line is true.
What might curtain walling cost in Tyldesley?
Allow £550 to £1,250 plus VAT per m². Size and specification set most of that figure for curtain walling, and the rest depends on what the survey finds on site.
What permissions should you check for curtain walling in Tyldesley?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Tyldesley area: a planning application, or work that doesn't materially affect the external appearance.
Expect planning and advert applications here to go to Wigan Metropolitan Borough Council in the normal way. We check what that means for your building when we survey it in Tyldesley.
| Town | Tyldesley |
|---|---|
| Area | Greater Manchester |
| Postcode districts | M29, M38, M46, WN7 |
| Planning authority | Wigan Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 71 miles |
| Survey | Free for new work |
Questions about curtain walling in Tyldesley
Can you match the frames already on my Tyldesley building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Can you replace failing curtain walling on premises in Tyldesley?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Is curtain walling right for a single-storey unit in Tyldesley?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Does a new shopfront in the Tyldesley area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Do roller shutters need planning permission in the Tyldesley area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.