Replacing tired glazing on Atherton premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.
Your survey is where the price gets real, because widths, heights, levels and access are all taken on site in Atherton.

What should you think about before commissioning curtain walling in Atherton?
Unloading is worth thinking through early on any Atherton site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
If the frontage joins a neighbouring building in Atherton, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Atherton premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What is a realistic budget for curtain walling in Atherton?
The guide for curtain walling is £550 to £1,250 plus VAT per m². Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
Who approves curtain walling in Atherton?
For curtain walling at premises in the Atherton area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Atherton premises normally go to Wigan Metropolitan Borough Council.
| Town | Atherton |
|---|---|
| Area | Greater Manchester |
| Postcode districts | BL5, M29, M46, WN7 |
| Planning authority | Wigan Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 72 miles |
| Survey | Free for new work |
Questions about curtain walling in Atherton
Will you coordinate with my architect or main contractor in Atherton?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Who do I deal with during a curtain walling job in Atherton?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Can part of an elevation in Atherton be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
What rules apply to a fire exit door through a shopfront in the Atherton area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Atherton area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.