Colour and craft do the work on a timber front in Atherton. We test paint on your actual frontage, draw any moulding that matters at full size, and keep every dimension on paper for you to sign off.
We measure your Atherton opening in person, at a time agreed with you first, so the visit fits around your trading.

How would we approach timber shopfronts for your Atherton premises?
A brand rollout can include timber, as long as the details repeat. For a branch in Atherton we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
In a parade of mixed fronts in Atherton, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Atherton premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What should you budget for timber shopfronts in Atherton?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
What consents could affect timber shopfronts in Atherton?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Atherton area, an application is then likely. The council confirms which side of that line a job falls on.
Expect planning and advert applications here to go to Wigan Metropolitan Borough Council in the normal way. We check what that means for your building when we survey it in Atherton.
| Town | Atherton |
|---|---|
| Area | Greater Manchester |
| Postcode districts | BL5, M29, M46, WN7 |
| Planning authority | Wigan Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 72 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Atherton
How much disruption will a timber front cause in my Atherton shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Do you make the joinery for Atherton shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Atherton from Great Barr by vetted teams working under S&K Glazing.
Can a timber front take a modern sign in Atherton?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Does a new shopfront in the Atherton area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
What rules apply to a fire exit door through a shopfront in the Atherton area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.