Your brand and your building both have a say in a new frontage. On premises in Atherton we start with what the structure allows, then bring in the name, colours and materials.
A survey in Atherton usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

What should you think about before commissioning shopfront design in Atherton?
If the pavement falls along your frontage, we survey the levels before drawing a line. Door threshold, stallriser and sill are then set from the real ground, which is where designs drawn from photographs tend to fail.
If your brand is new to Atherton, we look at how far the guidelines need adapting to this building. A logo may need a different size or layout on a shallow fascia, and that is worth settling early.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Atherton unit of that kind.
What is a realistic budget for shopfront design in Atherton?
We would budget £495 to £2,495 plus VAT per frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Who approves shopfront design in Atherton?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for shopfront work at premises in the Atherton area, an application is then likely. The council confirms which side of that line a job falls on.
For Atherton, the usual route for planning and advert applications is through Wigan Metropolitan Borough Council, and we confirm that when we visit.
| Town | Atherton |
|---|---|
| Area | Greater Manchester |
| Postcode districts | BL5, M29, M46, WN7 |
| Planning authority | Wigan Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 72 miles |
| Survey | Free for new work |
Questions about shopfront design in Atherton
Do I need a design service for a simple Atherton shopfront?
Not always. Every job gets a measured survey and scale drawings anyway. The design service adds options, visuals and a full specification, which pay off when the look matters most.
Can a design for Atherton premises follow my brand guidelines?
Yes. Send them over with your logo files, and we apply them to your elevation. Where a rule does not fit the building, we explain why and suggest an adjustment.
What do you need from me before designing for my Atherton premises?
The address, brand files and a few frontages you admire are a good start. Tell us your rough budget too, because it helps us focus on what can be built.
What rules apply to a fire exit door through a shopfront in the Atherton area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Atherton area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.