From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Urmston and the surrounding parts of Greater Manchester. One contract covers the frame, the glass and the junction with the shopfront below.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What makes curtain walling work well on Urmston premises?
Unloading is worth thinking through early on any Urmston site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
If the ground floor of your Urmston premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Urmston premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
Could curtain walling in Urmston need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Urmston area: a planning application, or work that doesn't materially affect the external appearance.
Expect planning and advert applications here to go to Trafford Metropolitan Borough Council in the normal way. We check what that means for your building when we survey it in Urmston.
How much should you set aside for curtain walling in Urmston?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Urmston |
|---|---|
| Area | Greater Manchester |
| Postcode districts | M17, M32, M41 |
| Planning authority | Trafford Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 65 miles |
| Survey | Free for new work |
Questions about curtain walling in Urmston
Can you replace failing curtain walling on premises in Urmston?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Who do I deal with during a curtain walling job in Urmston?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Is curtain walling right for a single-storey unit in Urmston?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Do I need listed building consent for a shopfront in the Urmston area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Do I need planning permission to change a shopfront in the Urmston area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.