A heritage shopfront in Urmston starts with what survives on the building, however little that seems. We record it, draw it and design any new work from that evidence.
Bring whatever you have to the survey in Urmston: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

How would we approach heritage shopfronts for your Urmston premises?
A narrow period front relies on fine detail. For a slim Urmston unit we'd keep the bars thin and the mouldings small, because anything oversized on a small front looks like a later addition.
In a parade of matching period fronts in Urmston, your neighbours are the pattern book. If their pilasters or cornices survive, we'd copy those sizes so your unit rejoins the row.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Urmston unit of that kind.
What consents could affect heritage shopfronts in Urmston?
For heritage shopfronts at premises in the Urmston area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Trafford Metropolitan Borough Council.
What should you budget for heritage shopfronts in Urmston?
Until the survey is done, plan on £8,495 to £24,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Urmston |
|---|---|
| Area | Greater Manchester |
| Postcode districts | M17, M32, M41 |
| Planning authority | Trafford Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 65 miles |
| Survey | Free for new work |
Questions about heritage shopfronts in Urmston
What does a period survey of my Urmston shop involve?
We measure the front, photograph every detail and check the condition of timber, paint and glass. With your agreement, we may lift a small piece of later boarding to see what survives behind it.
Who makes the joinery for Urmston premises?
Specialist joiners vetted by us and working under S&K Glazing make and fit it. You deal with one named contact, and the contract is with S&K Glazing Limited.
Can a new sign go on my old Urmston shopfront?
Yes, and traditional sign writing often looks right on a painted fascia. We'd draw the lettering to suit the fascia, then fix anything raised so it does no harm to the original timber.
Does a new shopfront in the Urmston area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
What rules apply to a fire exit door through a shopfront in the Urmston area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.