What should your premises say from across the road? We open every conversation about curved glass shopfronts in East Sussex with that question, then treat sightlines and proportion as seriously as the budget.
If you're a tenant, your landlord will probably want to see what is proposed. The scale drawings we produce for curved glass shopfronts are clear enough to send straight on, which saves a round of explaining.

How should you approach curved glass shopfronts in East Sussex?
If your building in East Sussex already has an old curved pane, we'd look at keeping it first. Older bent glass is hard to replicate, and a careful repair of the frame may save the piece that gives the front its character.
Curves change how a corner reads after dark. For a unit in Brighton or anywhere in East Sussex, we'd run lighting with the arc, because a single bright spot on curved glass pulls the eye to the reflection instead of the display.
What consents apply to curved glass shopfronts in East Sussex?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for curved glass shopfronts at premises in the East Sussex area, an application is then likely. The council confirms which side of that line a job falls on.
How much do curved glass shopfronts cost in East Sussex?
As a working budget, use £6,995 to £19,995 plus VAT for a typical frontage. Your place inside that range for curved glass shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Area | East Sussex |
|---|---|
| Nation | England |
| Towns covered | 16 |
| Main town | Brighton |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about curved glass shopfronts in East Sussex
Can the old curved pane at my East Sussex premises be reused?
Sometimes, if it is sound and can be taken out safely. We'd examine it at survey and tell you honestly whether repairing around it is the safer choice.
How do you measure a curve at premises in Brighton?
At three heights, using a plywood template or a laser survey. That shows whether the corner is a true arc, and tells us where any difference has to be taken up.
Do you supply curved glass shopfronts across East Sussex?
Yes. We travel from Great Barr to template the curve and fit the glass, with the panes made to that template.
Do roller shutters need planning permission in the East Sussex area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
What rules apply to a fire exit door through a shopfront in the East Sussex area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.